How to measure the sliding door of the wardrobe: Accurate measurement steps and precautions
When customizing or replacing wardrobe sliding doors, accurate measurement is a key step to ensure smooth installation of the door. This article will introduce in detail the process, tool preparation and common problem solutions for measuring wardrobe sliding doors, and attach structured data for reference.
1. Preparation before measurement
1.Tool list: Tape measurement (metal material is recommended), level, pen and paper, calculator.
2.Environmental inspection: Make sure the wardrobe frame is installed and the floor is flat, and remove obstacles.
| Tool name | use |
|---|---|
| tape measure | Measure door opening width, height and track size |
| Level | Check the level of the ground and track |
2. Detailed explanation of the measurement steps
1.Width Measurement:
- Measure the widths at the top, middle and bottom of the door opening, and take the minimum value as the final width.
- If the wall is tilted, the deviation value must be marked.
2.Height measurement:
- Measure the height of the door openings on the left and right sides, and take the minimum value.
- Pay attention to deducting the thickness of the baseboard or carpet laid on the floor.
| Measurement position | Things to note |
|---|---|
| width | Measure at least 3 points to avoid errors |
| high | Consider the impact of floor decoration materials |
3. Frequently Asked Questions and Solutions
1.Uneven walls:
- It is recommended to use gypsum board or wooden strips to level and then measure.
2.Track type impact:
- The ceiling joints need to be reserved for the hanging rails, and the ground rails need to add 5mm of sinking space.
| Question Type | Solution |
|---|---|
| Door opening tilt | Customize according to the minimum size, add adjustment gaskets |
| Measurement error | Repeat measurements 3 times to get the average |
4. Data record and review suggestions
1. Record format example:
- Width: 800mm (minimum value 798mm)
- Height: 2200mm (including track reservation)
2. It is recommended that two people check the data to avoid single measurement errors.
Summarize: When accurately measuring the sliding door of the wardrobe, you need to pay attention to details, especially multi-point review and special environmental adjustments. The risk of installation failure can be greatly reduced through standardized processes and tools. If you have any doubts about the data, it is recommended to contact a professional installer to re-inspecify.
check the details
check the details
en
