How to remove the inner rearview mirror
During daily car use or modification, disassembling the inner rearview mirror may be a problem that car owners need to face. Whether it is for a new rearview mirror or for cleaning or repair, it is crucial to master the correct disassembly method. This article will introduce the disassembly steps of the inner rearview mirror in detail and attach relevant data to help you complete the operation easily.
1. Common reasons for disassembling the inner rearview mirror
There are many reasons for removing the inner rearview mirror. Here are some common situations:
| reason | illustrate |
|---|---|
| Replace the rearview mirror | The original rearview mirror is damaged or the owner wants to upgrade to a more powerful rearview mirror (such as anti-glare, dash recorder integrated, etc.). |
| Repair windshield | When the windshield needs to be replaced or repaired, the rearview mirror must be removed first. |
| Clean or adjust | The rearview mirror is loose or the mirror surface is dirty, and it needs to be removed and thoroughly cleaned or re-fixed. |
2. Preparation for removing the inner rearview mirror
Before starting disassembly, make sure to have the following tools ready:
| tool | use |
|---|---|
| Screwdriver (one or cross) | Used to unscrew the rearview mirror fixing screws. |
| Plastic pry stick | Avoid scratching the windshield or interior. |
| Gloves | Protect your hands to prevent scratches. |
| Cleaning cloth | Wipe the mirror base or windshield. |
3. Detailed explanation of the steps for disassembly of the inner rearview mirror
The fixing of the inner mirrors may vary slightly from model to vehicle, but the following steps are applicable to most common models:
Step 1: Determine the fixed method
The inner rearview mirror is usually fixed in two ways:
| Fixed method | illustrate |
|---|---|
| Screw fixation | The rearview mirror base is screwed to the windshield bracket. |
| Snap fixing | The rearview mirror base is fixed to the windshield bracket by snapping or spring mechanism. |
Step 2: Remove the screw-fixed rearview mirror
If your rearview mirror is screwed, follow these steps:
1. Use a screwdriver to loosen the screws on the base of the rearview mirror (usually 1-2).
2. Gently push the rearview mirror upward or sideways to separate it from the bracket.
3. If the base of the rearview mirror has an adhesive part, you can use a plastic pry stick to help pry it open.
Step 3: Remove the snap-fixed rearview mirror
For the snap-fixed rearview mirror, the operation steps are as follows:
1. Find the connection between the rearview mirror base and the bracket.
2. Hold the rearview mirror with your hand and push hard towards the front or rear of the vehicle (the directions may be different for different models).
3. After hearing the "click" sound, the rearview mirror can be removed from the bracket.
Step 4: Treat residual glue stains
If there is adhesive residue on the base of the rearview mirror, you can use the following methods to clean it up:
| method | Operation Instructions |
|---|---|
| Alcohol wipe | Soak the cloth strips with alcohol, apply them on the glue stains and then wipe them. |
| Special glue remover | Spray the glue remover and let it sit for a few minutes before wiping it clean. |
| Plastic scraper | Use a plastic scraper to carefully scrape away stubborn glue stains. |
4. Things to note
1. Be gentle when disassembling to avoid excessive force causing damage to the windshield.
2. The rearview mirrors of some high-end models integrate electronic equipment (such as rain sensors, automatic headlight sensors, etc.), and the power must be disconnected before disassembly.
3. If the rearview mirror is difficult to disassemble, it is recommended to consult a professional or 4S store.
4. Check the windshield for cracks or damage after disassembly.
5. Reference for the data of the rearview mirror removal of popular models
Here are some popular models of interior rearview mirror removal methods:
| Car model | Fixed method | Disassembly direction |
|---|---|---|
| Toyota Corolla | Snap fixing | Push forward |
| Honda Civic | Screw fixation | Unscrew the screws |
| Volkswagen Lamway | Snap fixing | Press down |
| Nissan Sylphy | Mixed fixed | Twist the screw first and then rotate it |
6. Suggestions for reinstalling the rearview mirror
If you need to reinstall the rearview mirror, please note the following:
1. Clean the contact surface between the windshield and the rearview mirror base.
2. Install in reverse order of disassembly.
3. For snap-on rearview mirrors, make sure to hear a "click" to indicate that they are installed in place.
4. After installation, test the stability of the rearview mirror to avoid shaking while driving.
Through the above steps, you can safely and efficiently remove the inner mirror. If you have any questions about the operation process, it is recommended to seek professional technical support. Hope this article can provide you with practical help!
check the details
check the details
en
