How to remove the logo steering wheel: Hot topics and operation guides on the Internet in the past 10 days
Recently, car modification and repair have become one of the hot topics, especially the steering wheel disassembly tutorial that has attracted much attention. This article will combine the hot content on the Internet in the past 10 days to provide you with detailed steps to disassemble the logo steering wheel, and attach relevant data for reference.
1. Inventory of popular car topics on the Internet in the past 10 days
| Ranking | topic | heat index | Main platform |
|---|---|---|---|
| 1 | New energy vehicle battery maintenance | 9.2 | Douyin, Zhihu |
| 2 | Steering wheel modification tutorial | 8.7 | Station B, Autohome |
| 3 | Progress in autonomous driving technology | 8.5 | Weibo, Hupu |
| 4 | Used Car Buying Guide | 7.9 | Little Red Book, Understanding Car Emperor |
2. Preparation of logo steering wheel removal tools
| Tool name | Quantity | Instructions for use |
|---|---|---|
| Phillips screwdriver | 1 handful | Remove the fixing screws |
| steering wheel puller | 1 set | Safely remove the steering wheel |
| Torque wrench | 1 handful | Adjust screw torque |
| Insulating tape | 1 volume | Protection circuit interface |
3. Detailed explanation of the disassembly steps of the logo steering wheel
Step 1: Safety preparation
Make sure the vehicle is turned off and the negative terminal of the battery is disconnected, and wait 10 minutes for the air bag system to fully discharge. Wear insulating gloves when operating to prevent static electricity from triggering the airbag.
Step 2: Remove the steering wheel cover
Use a plastic spudger to gently pry open the covers on both sides of the steering wheel to expose the fixing screws. Be careful not to use excessive force to avoid damaging the buckle.
| Common car models | Screw specifications | Torque value |
|---|---|---|
| Flag 308 | M12 | 35Nm |
| Flag 408 | M14 | 40Nm |
Step 3: Remove the steering wheel body
Using the steering wheel puller, apply even pressure and slowly separate the steering wheel from the steering column. Pay attention to record the alignment marks of the steering wheel and steering column to facilitate subsequent installation.
Step 4: Deal with the electrical interface
Wrap the speaker and airbag wiring harness interface with insulating tape to prevent short circuits. It is recommended to take photos to record the wiring harness connection method.
4. Notes and popular questions and answers
| question | solution |
|---|---|
| The steering wheel cannot be removed | Check that all fixing screws have been removed and special lubricant can be used |
| air bag light comes on | Recheck the wiring harness connection and reset with a diagnostic tool if necessary |
5. Modification trends and suggestions
According to recent hot data, searches for carbon fiber steering wheel modifications have increased by 120% month-on-month. It is recommended to choose products from regular manufacturers, and dynamic balance testing is required after modification. After completing the modification, it is recommended to conduct a test drive of 20-50 kilometers to test the stability of the steering system.
With the structured guidance above, you can safely complete the removal of your emblem steering wheel. If you need more professional modification services, it is recommended to consult the official 4S store or certified modification agency.
check the details
check the details
en
